V3-100 sectional spool valve 100 Lpm
The V3000 is one of the most compact 100 litres per minute hydraulic directional control valves available. Designed for pressures up to 250 bar with a range of spool and ancillary options the V3000 is accepted in industrial, mobile, marine winch and agricultural markets for its flexibility and reliability. This valve features excellent metering characteristics and integral load check valve and is suitable for open and closed circuits.
The lever mechanism is a pressure die casting which totally encloses the spool for added protection. A range of optional ancillary valves are also available to be able to match the requirements of the most complicated and demanding circuits.
Technical data sheet
V3-100 G3/4 Manual Spool Valve 100lpm 
V3-100E solenoid spool valve 100 Lpm
The V3-100 G3/4 sectional spool valve is available with solenoid control, using compact 24 watt DC coils to switch the internal oil pilot which shifts the main spool. A damping orifice fitted in the pilot line eliminates the harshness usually associated with standard direct acting solenoid valves and gives a positive feel to the control system.
Interchangeable with V3-100 manual valves.
Technical data sheet
V3-100E G3/4 Manual Spool Valve 100lpm
Ancillaries
| Flow control sections | Pressure compensated meter-in type flow control for a V5-60 valve assembly. Regulated flow is supplied via a pressure gallery to downstream sections while upstream is unaffected. | Datasheet |
| Rotary lever | Developed to give the operator precise control of motors and cylinders. Lever swings through a 180° arc and has a friction detent allowing the selected position to be maintained. | Datasheet |
| Load sensing section | Used to control the speed of a motor with varying loads. A rotary type lever is often used to maximise control. Load sensing sections are not inter-changeable with standard V3-100 sections or covers. | Datasheet |