V3-100 G3/4 Sectional Valve 100Lpm

The V3-100 sectional spool valve is one of the most compact 100 l/min valve available. Designed for pressures up to 250 bar the valve is available with two, three and four position spool control options and a range of spool types. The lever mechanism is a pressure die casting which totally encloses the spool for added protection. A range of optional ancillary valves are also available to be able to match the requirements of the most complicated and demanding circuits. 

The V3-100 is also available with solenoid control. It uses powerful yet compact 24 watt DC coils to switch the internal oil pilot to engage the main spool. A damping orifice fitted in the pilot line eliminates the harshness usually associated with standard direct acting solenoid valves and gives a positive feel to the control system. Both manual and solenoid sections can be built into a valve assembly and the solenoid sections have the options of lever override.

• G3/4 (BSP) ports

• 100 lpm

• 250 Bar

• Manual or Solenoid control

• Fully enclosed spool

• Integral load hold check

• Suitable for open or closed centre circuits

• Marine protection option

• Range of ancillaries

                                                                       Manual Section                  Solenoid Section 
Rated Flow:                                                  100 l/min                             100 l/min 
Max pressure, service port:                       250 bar                                250 bar 
Max pressure, inlet port:                           250 bar                                 210 bar 
Max back pressure, outlet port:                  35 bar                                  35 bar 

Temp rating: minimum:                               -20°C                                     -20°C 
Temprating: maximum:                               +65°C                                    +65°C 
Spool leakage at 210 bar at 20ºc:             <6cc/min                           <6cc/min 

Lower leakage rates are available depending on application - contact HyPro technical sales for further information

Electrical :
Coil voltage nominal:                                   -                                              12/24VDC or 110vac 50 Hz 
Coil power:                                                     -                                              24W 
Connection:                                                    -                                              DIN 43650 
Protection:                                                      -                                              IP67 
Cable Ø (not supplied):                                -                                              6 - 8mm
Weight (1 bank):                                            6.9 kg                                     8.7 kg 
Recommended Oil:
Mineral based hydraulic:                            ISO VG37                               ISO VG37 
Filtration (minimum):                                  25 micron                               25 micron 
Materials 
Body - cast iron:                                           BS1452-250                            BS1452-250 
Manifold:                                                       -                                               Aluminium BS1490 
Tie studs M8:                                                M/F45T                                   M/F45T 
Tie studs torque:                                          13.5 Nm                                   13.5 Nm 
Seals:                                                             Nitrile                                       Nitrile 

 

Hy-Pro Valve Catalogue (HB0015_01_Apr_2018.pdf, 2,597 Kb) [Download]

Sectional Valve Manual (DM_0001_05_Sectional_valve_manual.pdf, 4,046 Kb) [Download]

Contact us if you would like more information.

For bespoke solutions or quantity discounts

Call sales on: 01626 863634

Or click to email: sales@hypro.co.uk

For delivery from stock

Click here to find a distributor

Our Clients